Mankato is ag and iron country. Soybean processing, food plants, generator manufacturing, circuit boards, plastics, metal fab, and the machine shops that feed all of them. When one of those machines stops, production stops, and that’s the call we take.
Allied MachineX repairs, rebuilds and sells industrial production equipment, CNC mills and lathes, press brakes, punch and stamping presses, ironworkers, shears, fiber lasers, plasma cutters, wood and metal CNC routers, wire and sinker EDMs, waterjets, band saws and grinders, for manufacturers across Mankato, North Mankato and southern Minnesota. Our technicians are based in Minneapolis, a little over an hour up Highway 169, backed by mechanical engineers who make sure you get a correct diagnosis and honest advice. For emergency hard downs, we can usually have a tech onsite the same day, anywhere in the state. Our 24/7 emergency line means you reach a real technician at 2 AM, not a call center. Call 844-763-1748.
Machine Down in Mankato? Here's What Happens When You Call
A lot of repair companies take your address and show up cold. Here is our process, so you know what you’re getting before you ever dial:
- You describe the symptom to a technician, not a call center. Alarm numbers, when it happens, what changed. The more you can tell us, the faster we get there.
- We start remote diagnostics before the truck rolls. For many control and electrical faults, our technicians begin troubleshooting over the phone, often cutting on-site diagnosis time significantly.
- We troubleshoot the machine as one system: electrical, mechanical, hydraulic, pneumatic and control, with mechanical engineering expertise behind the diagnosis. The cause is rarely the part everyone guesses, so we find the actual failure before anyone spends money.
- You get a straight answer on repair, rebuild or replace. We do both service and machine sales, so we have no incentive to push one answer. Sometimes it’s a $400 sensor. Sometimes it’s time.
- The work gets verified before we call it done. NIST-traceable calibration and post-repair checks come standard, not as an upsell.
Pro tip: Don’t clear a recurring alarm and keep running. Write down the full alarm number and when it happens. It cuts diagnostic time more than anything else an operator can do.
Repair It or Replace It: One Call Covers Both
Here’s what makes us different from most of the options in southern Minnesota. Repair outfits can’t sell you a machine. Machine dealers don’t want to fix your old one. Allied MachineX does both, so when your press brake or CNC goes down, the conversation starts with what’s actually best for your shop: fix it, rebuild it, or replace it with new or refurbished iron. Our engineers run that math with you honestly, because we make our living either way.
CNC Mill, Lathe and Machining Center Repair in Mankato
CNC machine repair in Mankato covers vertical and horizontal machining centers, turning centers and CNC lathes from Mazak, Haas, Hurco, Okuma, Doosan, DMG Mori, Makino, Fadal, Kitamura and SMART, plus the Bridgeport and Sharp manual machines still pulling their weight in tool rooms across Blue Earth and Nicollet County. Control diagnostics on Fanuc, Siemens, Mitsubishi, Heidenhain and Fagor, plus HMI controllers like Delem and Cybelec. Wood and metal CNC routers get the same coverage, so cabinet and millwork shops call the same number as the machine shops, from SCM and Biesse nested routers to ShopBot and AXYZ machines.
The usual calls: won’t start, won’t home, axis losing position, servo alarms, following errors, spindle noise or overheating, stuck tool changers, lost parameters, dead screens, and intermittent faults that vanish when the tech shows up. Bring us the symptom. Finding the cause is the job.
Press Brake, Punch Press and Shear Repair
Southern Minnesota fab shops run their forming equipment hard, and press brake repair is one of our heaviest calls: Cincinnati, Chicago Dreis & Krump, Amada, Accurpress, LVD, Wysong, Durma, Ermaksan, HACO and Trumpf machines, covering hydraulics, backgauge repair, ram positioning and Y1/Y2 problems, crowning, calibration and safety systems. Punch and stamping press work covers Minster, Bliss, Niagara and Verson mechanical presses plus Amada, Trumpf, Strippit and Murata Wiedemann turret punches. Ironworker repair covers Scotchman, Piranha and Edwards machines. Shear repair on Cincinnati, Wysong, Accurpress and Amada equipment covers blade gap, rake angle, hold-downs and blade flips, and we handle plate rolls and tube benders too.
Pro tip: Inconsistent bends aren’t always tooling. Ram parallelism, hydraulics, crowning and backgauge position all contribute. Check the machine before you blame the punch and die.
Fiber Laser and Plasma Cutting Machine Repair
Laser and plasma repair on Trumpf, Bystronic, Mazak, Mitsubishi, Prima Power, LVD, Amada, Ermaksan and Hypertherm equipment: cutting heads, protective windows and lenses, nozzle alignment, height sensing, source troubleshooting, chillers, power loss and edge quality. Plasma work on Hypertherm, Esab, Messer and Koike systems covers arc stability, torch height control, gas delivery and consumables.
EDM and Waterjet Repair
Wire and sinker EDM service covers Sodick, Mitsubishi, Makino, Fanuc RoboCut and AgieCharmilles machines: wire threading and breakage problems, power supply faults, flushing and filtration, dielectric system issues and positioning accuracy. Waterjet repair on Flow, Omax and Jet Edge tables covers intensifier pump rebuilds, seal replacement, cutting head and orifice problems, abrasive delivery and height control. A down EDM stops tooling work just as fast as a down mill, and it gets the same dispatch.
Servo, Drive, PLC and Electrical Troubleshooting
We troubleshoot servo motors, drives, amplifiers and encoders from Fanuc, Siemens, Yaskawa, Mitsubishi, Allen-Bradley, Indramat, Glentek, Baldor and Kollmorgen, with rebuild and replacement sourcing when field repair isn’t enough. Control-side work runs through Allen-Bradley, Siemens, Omron, Modicon and AutomationDirect PLCs, machine I/O, power supplies, VFDs, safety relays, light curtains and E-stop circuits. A lit screen doesn’t mean every voltage and safety condition is present, so we diagnose the whole circuit instead of guessing at the visible part.
We also service and integrate machine safety systems: light curtains, barriers, and advanced solutions from Lazersafe, Sick and Pilz, so your operation stays protected and compliant, not just running.
Hydraulic, Pneumatic, Saw and Grinder Repair
Hydraulic work covers cylinders, pumps, valves, proportional valves, leaks, pressure problems and overheating. Pneumatic work covers cylinders that won’t move, solenoids that fire with no motion, clamps that won’t release and low-air alarms, and we check pressure, flow controls, sensors and PLC outputs before anyone buys a part. Band saw repair runs on Hyd-Mech, Kalamazoo, DoAll, Marvel, HE&M, Behringer and Cosen saws, and grinder repair on Okamoto, Chevalier, Brown & Sharpe, Harig, Blanchard and Mitsui machines.
Spindle Repair and Machine Rebuilds
Runout, bearing noise, vibration, overheating, bad finish and tool retention problems all point at the spindle, and the fix runs from field repair to full rebuild through our machine rebuild services. Ballscrew and positioning work covers backlash, support bearings, alignment and lost motion.
Every rebuild leaves with documented, NIST-traceable calibration, so you have proof of accuracy for your own quality system, not just our word for it.
Pro tip: If an operator says the spindle sounds different, take it seriously. A change in noise, heat or finish is the cheap warning before the expensive failure.
New and Refurbished Machine Sales in Southern Minnesota
When the math says replace, we’re the same phone call. We’re proud to offer HACO press brakes, shears and fiber laser systems through our new machine sales, and we can assist with a number of other popular brands, so call and ask our sales team what’s available. Our refurbished machines serve shops that need capacity without new-machine money, and every refurbished machine we source includes a free tune-up you can use within two years of purchase.
Buying through the company that also repairs your equipment changes the purchase. We size tonnage, bed length, materials and controls to the parts you actually run, not the biggest thing on the brochure, then handle delivery coordination, installation, leveling, calibration and startup, and we’re the ones answering the phone after the machine is on your floor. We also consult on equipment selection, helping you determine the best options for what your facility actually does.
Pro tip: Don’t buy a press brake for today’s largest part. Size it for the material mix you expect to run three to five years out. Too little machine forces another purchase early, and way too much ties up money for nothing.
Maintenance Without the Headcount
Hiring maintenance talent in southern Minnesota is brutal, and one resignation can leave a plant with nobody who can touch the equipment. We take that problem off your plate: scheduled preventive maintenance on your equipment list, priority response when something breaks, and engineering support for the repair-or-replace calls. Every PM visit ends with a straight priority list: fix now, schedule soon, watch, upgrade later. PM visits can include NIST-traceable calibration: the documented, auditable kind your quality manager actually wants in the file. Call 844-763-1748 to scope a program.
You'll Talk to Owners, Not a Script
Allied MachineX is owned and operated by Tim, Josh, and Kent, three people with more than 15 years of combined shop-floor experience who answer their own phones. When you call about a machine down in Mankato, you’re talking to someone who has personally worked on Haas mills, Mazak lathes, and Amada press brakes.
“Manufacturing doesn’t sleep, and neither do we.” Tim, co-owner
“We’re not just fixing machines, we’re keeping people employed and production lines running.” Josh, co-owner
“Most shops don’t need a new machine, they need someone to find the actual failure. Our job is to tell you which is which, even when the answer is a $400 sensor. That’s what we’d want someone to tell us.” Kent, co-owner
Serving Mankato, North Mankato and Southern Minnesota
We cover the whole Mankato industrial footprint, including Northport Industrial Park off Highway 14 in North Mankato and the shops along the Highway 169, 14, 22 and 60 corridors. Southern Minnesota coverage continues through St. Peter, Le Sueur, New Ulm, Waseca, Janesville, Owatonna, Faribault, St. James, Fairmont and Albert Lea.
We also serve the Twin Cities, with dedicated coverage in Minneapolis and St. Paul, plus St. Cloud in central Minnesota and Rochester and Winona to the east. For emergency hard downs, our 24/7 line is the fastest way to reach a technician, and our Minneapolis-based techs put Mankato within same-day reach.
Frequently Asked Questions
Do you provide CNC machine repair in Mankato?
Yes. We provide CNC and industrial machine troubleshooting, repair, rebuilds, preventive maintenance and machine sales for manufacturers in Mankato, North Mankato and across southern Minnesota, with technicians based in Minneapolis.
How fast can you get to Mankato?
Our technicians are based in Minneapolis, a little over an hour up Highway 169 from Mankato. For emergency hard downs we can usually respond same day, and for scheduled work you get a real arrival window when you call.
What brands do you work on?
Mazak, Haas, Hurco, Okuma, Doosan, DMG Mori, Makino, Fadal, Kitamura, Hardinge, SMART, Bridgeport, Cincinnati, Chicago Dreis & Krump, Amada, Accurpress, LVD, Wysong, Durma, Ermaksan, HACO, Trumpf, Bystronic, Hypertherm, Minster, Bliss, Niagara, Verson, Strippit, Murata Wiedemann, Scotchman, Piranha, Edwards, Hyd-Mech, Kalamazoo, DoAll, Marvel, Behringer, Okamoto and Blanchard among others, with control and servo work on Fanuc, Siemens, Mitsubishi, Heidenhain, Fagor, Yaskawa and Allen-Bradley, HMI controllers like Delem and Cybelec, wood and metal CNC routers, wire and sinker EDM machines from Sodick, Mitsubishi, Makino, Fanuc and AgieCharmilles, and waterjets from Flow, Omax and Jet Edge. If your brand isn’t here, call anyway.
Can you troubleshoot a machine if we don't know what's wrong?
Yes. Most service calls start with a symptom, not a known failed part. Diagnosing the mechanical, electrical, control, hydraulic or pneumatic cause is the job. We can also start remote diagnostics before arriving.
Do you repair punch presses, shears, ironworkers and CNC routers?
Yes. We service mechanical stamping and punch presses from Minster, Bliss, Niagara and Verson, turret punches from Amada, Trumpf, Strippit and Murata Wiedemann, ironworkers from Scotchman, Piranha and Edwards, and shears from Cincinnati, Wysong, Accurpress and Amada, along with plate rolls, tube benders and wood and metal CNC routers. If it bends, cuts, stamps or routs in a shop, we can likely service it.
Do you repair EDM machines and waterjets?
Yes. We service wire and sinker EDM machines from Sodick, Mitsubishi, Makino, Fanuc and AgieCharmilles, and waterjet systems from Flow, Omax and Jet Edge. That covers wire transport, power supply and flushing issues, intensifier pumps, high-pressure seals, orifices, abrasive feed and edge quality.
How much does CNC machine repair cost?
It depends on the failure, but here is how we keep it honest: you approve the diagnosis before parts get ordered, and you get a repair-versus-replace recommendation backed by mechanical engineering expertise, not a sales quota. Call 844-763-1748 for current diagnostic rates. Scheduled maintenance programs can be scoped to a monthly budget.
Do your repairs come with a warranty?
New machines and most replacement parts carry manufacturer warranties. On repair work, we put warranty terms in writing before the job starts. And your team signs off every repair as complete and tested before our technician leaves your floor, so everyone agrees on the condition of the machine when it changes hands.
Do you sell machines too?
Yes, and that’s the point of calling us first. We sell HACO press brakes, shears and fiber lasers, plus refurbished machines, with more new brands joining the lineup. We also consult on equipment selection to determine the best option for what your facility actually does, so when a machine goes down we can give you an honest answer on repair versus replace and handle either one.
Should we repair our old machine or replace it?
We’ll evaluate the failure, the machine’s overall condition, parts availability and your production needs, then lay out the repair, rebuild, upgrade and replacement options honestly. Sometimes the answer is a $400 sensor. Sometimes it isn’t.
Can you take over our facility's maintenance so we don't have to staff it?
Yes. Plenty of southern Minnesota facilities can’t hire or keep the right maintenance people, so they contract it out. We handle scheduled PM, emergency coverage and engineering support, sized to the equipment on your floor.
Call Allied MachineX for Machine Repair in Mankato
CNC down. Press brake off angle. Laser cutting ugly. Saw line stopped. Whatever quit on you, call 844-763-1748 and let’s get it running. The emergency line is answered 24/7.
Sales and scheduled maintenance: Monday to Friday 7:00 AM to 6:00 PM, Saturday 8:00 AM to 12:00 PM. Emergency machine repair: 24/7.